Tips From the Moving Business Pros: The Best Ways To Move a Pinball Machine



With pinball making a substantial resurgence across the nation, Mild Giant wants to ensure that these timeless, beautiful machines stay damage-free while being carried. Oh, and we desire the people moving them to be safe, too.

At very first look, pinball machines can appear daunting to move due to the fact that of their size, weight, and fragility. Fortunately, our proficient Giants have a couple of tricks up their sleeves to ensure your pinball is moved with ease.
Folding Down the Headbox

The majority of contemporary pinballs (made in the last Twenty Years or so) have a hinge system which allows the headbox to be folded down. Early pinball devices had their headboxes bolted on, utilizing either 2 or four bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State makers.

Later on machines have hinges and use a latching system to keep the headbox upright. There might likewise be 2 bolts inside as added safety, in case the latch is broken or inadvertently un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball makers, you require to remove the headbox rear access panel to get to the bolts and plugs within. Generally this panel has a lock on it to keep it in location, but over time the key might have been lost. On a regular basis, there is a screw keeping this panel in location.

Once inside, eliminate the bolts and disconnect the big adapters that have circuitry going down into the machine. You may wish to identify these adapters to put them back in the ideal spot, but they ought to be different sizes, making it tough to plug back improperly.

You can now get rid of the headbox entirely, or fold the headbox down onto the playfield glass. Make sure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will help keep the back glass in location.
Early Strong State Pinballs

For early Strong State Pinballs, you will require to remove the back glass. There is a lock situated on the headbox in one of 3 locations: the left-hand side at the top, right-hand side at the top or on top of the headbox in the.

When unlocked, eliminate the back glass by raising it up utilizing the lift channel (at the bottom of the glass), then pull it out from the bottom.

Then, open the back box light panel by lifting the latch located on either the left-hand side or right-hand side. The panel can now swing out towards you, and provide you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs need you to raise up the light panel in order to swing it open.

Now that you are within, you can get rid of the bolts, and any plugs that have wires going down into the machine. You may wish to label these plugs to put them back in the best spot. You may not have to eliminate the plugs, as the circuitry must be long enough to permit the headbox to be folded down.

At this moment, you can secure the light panel and change the back glass.
Modern Solid State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable latch system located at the back of the headbox. Using the supplied key, turn the latch 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can easily unlatch the back box at the back of the machine. This is a simple setup and requires no tools.

If you can now fold down the head box onto the cabinet, you're done. Ensure you utilize some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.

You require to get within if you can not fold the head box down. There is a lock situated at the top of the back glass in the center. Utilize the provided secret to unlock, and get rid of the back glass by raising it up from the bottom, then pulling it out from the bottom.

Next, you will require to get rid of the display screen panel. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back weblink glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

Eliminate the 2 bolts, put the back box back together, and fold down the head box onto the cabinet. Ensure you utilize some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in location.
Eliminating the Legs.

Pinball Machine legs are held in place by eight bolts. The modern pinballs have captive nuts or threaded plates inside for the bolts to screw into.

But these captive nuts and threaded plates can be harmed, and using additional nuts might have been needed. If this is the case, you will require to open the front door of the pinball, slide out the playfield glass, and raise the playfield.

With the front door (coin door) open, move the lock down bar lock throughout and eliminate the lock down bar. Slide out the playfield glass, and put in a safe place. Next, raise the playfield by placing your hand where the ball drains pipes, and raise the playfield up.

You need to now have access to any nuts that might have been utilized. When any nuts have been removed, replace the playfield glass and lock down bar, and lock the front door.

Be sure to mark or remember which legs are for the front and back, as they will be changed in a different way to match.
Filling the Pinball.

You are now prepared to transfer your pinball machine. Before you load it, make certain you get rid of the pinballs so they do not bounce around throughout transportation.

If you are moving the pinball utilizing a van or SUV, it might be simpler to remove the legs just prior to filling the maker. Get a buddy to help and have one of you supporting the pinball, while the other gets rid of the front legs.

Make certain you strap the pinball in, as you do not want it moving if you have to stop suddenly!

For Electro-Mechanical pinball makers, you require to eliminate the headbox rear access panel to gain access to the bolts and plugs within. (Some more recent Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

If you are moving the pinball utilizing a van or SUV, it might be simpler to remove the legs just prior to filling the device. Grab a friend to assist and have one of you supporting the pinball, while the other eliminates the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *